Guest Book

 
Kuba_T1000July 18, 2010 Reply

Hello everyone! Leave your comment or sugestion here.

 
NikonSeptember 6, 2010 Reply

You went through the trouble of machining all these parts for a realistic looking airsoft minigun, and the damn barrels dont even rotate? Lame!

 
Kuba_T1000September 6, 2010 Reply

I had two options:
1) 1:2 scale model without spinning barrels, but shooting.
2) 1:2 scale model with spinning barrels, but without shooting.
I chose first one.
In this scale model there isn\'t a free space for barrels spinning mechnism.

If I will make a 1:1 version the barrels will be working as in original :)

 
Knut ToftSeptember 2, 2010 Reply

Love the site and your miniguns!

I\'m rely thankfull for the tutorials, but there is still alot that i dont understand because it\'s not finished yet.
Can\'t wait for the updates!

I will donate when i\'m done with my minigun :D

 
dmanSeptember 25, 2010 Reply

Hi. Im so happy i finally found a site that helps people make mini-guns, rather than just sell them. :) i have a few questions and comments if you don\'t mind:

Would your free 3d models work on Autodesk Inventor? because thats the only 3d modeling program i have, and know how to use well. sorry i don\'t know much about rendering formats and whatnot.

Ive been wanting to build a mini gun for sometime now, i just don\'t have the wallet, and i didn\'t know where to start. this site gave me many ideas, and one of my firing mech prototypes was very similar to yours, and im glad someone finally perfected it. :D

i have an idea for the spinning barrels comment. to make the gun shoot out of all six barrels would be a real chore, as i found out through my research, but i thought why not just shoot through one barrel, located in the center, and have the rest of the barrels just spin around it? i know on 1/2 scale models there would be no room for it, but possibly on a 1/1 you could hide a little motor mech in the body somewhere, which could just be wired with the trigger. just an idea. :P

also one more question i had was the barrel dimensions... since this gun uses so much ammo, i probably wont want to buy super precision bbs for it, so i don\'t know what the inner barrel diameter should be. what was your inner barrel diameter? i was thinking of a 6.08mm barrel, as are standard barrel bore for most aegs, because even though a tight-bore would be better, it might clog due to the rof... have you ever had a jam?


thanks in advance for the help. i look forward to the updates on this site, and i hope to donate soon. :)

 
Kuba_T1000September 26, 2010 Reply

-> Autodesk Inventor:
I don\'t use it, no idea about 3D filetypes what are supported in this program. I think that file convertion will be needed.

-> YES, In 1:1 scale model there is a free space to make barrels spinning. In my opinion barrels spinning is worth to make only if gun will be shotting from each barrel separately, as in real version.
Unfortunately, I could not finalize it yet.

-> Inner barrel diameter:
I used an aluminum pipe from local \"Building Shop\", there are the differences between the pipes, I selected one with internal diameter around 6.1mm. But I\'ve a few with 5.96mm and with 6.15 and similar :)
I never had a jam in a barrel, or Hop-Up unit. I use only precision BBs. Jam by the bad BBs are only in a Ammo Box. BBs should be as smooth as possible. After the shooting at home I use the same BBs again, sometimes it causes jams (only in AmmmoBox).

 
john shawOctober 1, 2010 Reply

Could you machine mill a plastick block? And if so, could you use a cnc machine? It would make it a lot mor legal for aisoft since it wouldn\'t look so real. It would also make it a lot cheaper. Right

 
Kuba_T1000October 1, 2010 Reply

All parts were made using CNC machines.
If you use hard plastic block, it should works. But in 1:1 scale weight probably will be too high so plastic can be broken.

 
HermitbirdNovember 24, 2010 Reply

Hello, I\'m not very old, (12) and my neighbor works at a place with a cnc machine. How much would it cost to make each peice?

 
Kuba_T1000November 28, 2010 Reply

I think it will be too expensive as for 12 years old child.
I paid for all parts for only my Minigun (without AmmoBox) about $850.

 
cadeingramMarch 6, 2011 Reply

where did you get the handle from and can i get a list of all the parts

 
Kuba_T1000March 9, 2011 Reply

All parts ware made by CNC Company, but Front Handle elmement No.II was adopted from \"Furniture Handle\" :)
For list of the parts, check: Gallery - My 3D Models - and picture No. 99 and 100.

 
Essay PapersApril 29, 2011 Reply

Love your guns! Thanks for site.Essay Papers

 
はじめMay 18, 2011 Reply

メール友達がすぐに作れちゃうサイト!完全無料だからはじめてでも安心・簡単に作れちゃいます。趣味別、年齢別など豊富なジャンルから探せるからメール友達がつくりやすい。

 
dmanJune 28, 2011 Reply

hi. i am attempting to build the hpa conversion mod u have.i am confused on a few things so far...

for the electronics, what is the function of the jumper pin? it looks like it would bypass a resistor.
also where do i connect the trigger? i saw in the picture of the control box that there was a connection above the jumper pin, on the top left hand corner, but i could not find it in the schematic.

regarding the solenoid valves, where could i buy the large solenoid valve? i saw the smaller one from a site located in poland but i could not find the larger one that you had used. also i am unsure of them.. do i need to buy an additional plug thing to go over the shaft? also how do i know which ones of those are compatible with which solenoids? also i was wondering what the diameter of the hose was, and what the diameter of the hole in the rear plug is (the hole that connects to the hose).

sorry for all the questions, and thank you for the help and all the wonderful tutorials!

 
exebyexeseeApril 20, 2012 Reply

jgefSIiOzTjY, http://assuit7510.insanejournal.com/ assuit7510, 16707, paydayloansuk927, %+{ , http://aemil1889.soup.io/post/242744022/Have-Coffee-shop-Moola-totally-free aemil1889, : = , thurio4785, mAVIKUaHqXEo, http://giol8473.livejournal.com/3965.html giol8473, 96390, bingo711, sHkaDJUYXhca,

 
UtesstormMay 11, 2012 Reply

http://genericpercocet.name
generic percocet
generic percocet

 
ShorryvorMay 22, 2012 Reply

how much does cialis cost by around one hour, and the maximum concentration itself is decreased by nearly one-third.<>0] cialis soft tabs canada potentially fatal.<>5] cialis canadian safe to use. I’m a responsible guy and I lead a healthy life, I didn’t want anything that could harm my cialis daily canada activity. If you experience chest pain, nausea, or any other discomforts during sex, seek immediate medical help. generic cialis overnight delivery,cialis online,generic cialis reviews,order cialis without prescription

 
DusethisekMay 29, 2012 Reply

view here cvqy
http://www.mulberryhandbagsuksale.com mulberry unit stracathro

 
Oakley Hijinx June 14, 2012 Reply

http://www.chainatdd.com/webbord/viewtopic.php?f=4&t=224810&p=270838#p270838

http://www.polacy24.pl/forum/viewtopic.php?f=42&t=3925581&p=5236842#p5236842

http://forum.hoyoku.com/viewtopic.php?f=3&t=807518&p=1125957#p1125957

Time is valuable. Let us rather read theEpistles and Gospels. These days, with pcs and the online world, considerably of the time consuming areas involving communications and report maintaining have mostly grow to be just about nullified. Another famous brand that brings out some exquisite perfumes is Ralph Lauren perfume. Many designer labels are now being made in China, like it or not.
But wait, so what\'s aurat? To have a woman, everything is aurat besides face and tn post office palms. its very funny. Whether we live 20 years or 100, our Moncler shop online lives pass quickly. These Titleist golf equipment can help you develop your skill by delivering outstanding performances on all shifts. The scent is consisted of Tiger Orchard, Pear Nectar, Sweet Italian Orange, Toffee, Indonesian Patchouli, and Fruity Chypre notes.


http://www.jexus.co.uk/Animusrpg/showthread.php?tid=95000&pid=158268#pid158268

http://wikipool.net/forum/viewtopic.php?f=21&t=226482&p=313292#p313292

http://www.oppai.fr/forum/viewtopic.php?f=9&t=144462&p=172678#p172678

 
retstoonyJune 26, 2012 Reply

[url=http://quick-loansa.com/#183893]quick loans[/url] , quick loans , http://quick-loansa.com/#65096 quick loans

 
DusethisekJuly 2, 2012 Reply

[url=http://www.christianlouboutin4store.co.uk]Christian Louboutin uk sale[/url] apwt
pmxi
[url=http://www.charmsaleoutlet.com]http://www.charmsaleoutlet.com[/url]

 
FiesseketginkJuly 5, 2012 Reply

The best initial two \"no cash down\" deals were being possibly a luck. The particular woman getting good , the burkha me taking advantage pros. The best was purchasing the best primary home under all the GI Bill which includes a VA loan girl absolutely no cash down. [url=http://cashadvance00.com]cash advance[/url] Hedged Tender A new tender sell wherein good investor quick offers his shares for you to hedge also in the tender not going via, is actually termed within the hedged tender. cash advance College loan insurance coverage is usually a kind of safeguard insurance policies this safe guards an individual next to a incapability to produce financial loan monthly payments upon regular monthly time frame. It is just a type of monthly payment security insurance plan that may be carried out to pay a person towards default with settlement involving mortgage as a result of any sort of accident, health issues or maybe some other event. With major instances, the actual insurance policies is actually delivered to handle loans, a multitude of and in many cases mortgage loans. http://cashadvance00.com An additional benefit for Home finance loan Refinance is the fact that it is about with a decrease price. The speed wanted to anyone while you are obtaining your house will depend on different facets for instance advance payment, the credit rating as well as the present fees out there. Nonetheless, percentage of interest hold fluctuating frequently along with often. As well as, your own once a month payment involving Re-financing Mortgage will be specifically afflicted with this kind of charge.

 
DusethisekJuly 7, 2012 Reply

[url=http://www.christianlouboutinsalemarket.co.uk ]christian louboutin sale[/url] ahry
http://www.christianlouboutinsalemarket.co.uk gccx
iukf

 
DusethisekJuly 15, 2012 Reply

[url=http://www.oakleysunglassesinussale.com]oakley sunglasses cheap[/url] kusa
http://www.oakleysunglassesinussale.com upcm

Your Response